点击图片查看原图
通过平台认证认证 
DK-15多功能管板坡口机是一款手动操作的电动工具,该机适用于加工焊接前的坡口(可加工成K,V,X,Y型坡口),不仅能对管子内孔进行坡口加工,也可以对板材进行坡口加工及金属材料的去毛边等.它的多功能性与灵活性,能够大量的提高工作效率而使之成为具有吸引力的设备,该机器结构非常紧凑,能够在环境复杂且难于加工的地方操作.
DK - 15 multi-function tube plate groove machine is one hand operated electric tools, this machine is suitable for processing before welding groove (can be processed into K, V, X, Y type groove), can not only to pipe inner hole for groove processing, can also be on board for groove processing and metal materials deflashing, etc. Its versatility and flexibility, can a lot of improve work efficiency and make it become attractive equipment, this machine structure is very compact, can in the environmental complex and difficult to processing place operation.
技术特点：
1.紧凑和轻便的设计操作轻松自如
Compact and lightweight design operation easy
2.2450W强劲电机大大提高加工效率2450 w
strong motor greatly improve processing efficiency
3.小巧的切削头操作灵活,能达到不易加工的地方
Small cutting head ─ ─ flexible operation, can achieve not easy processing place
4.加工范围广对直径50mm以上的管子做内外坡口均能达到要求
Processing scope to a diameter of 50 mm above the pipe to do inside and outside groove all can meet the requirements
5.坡口角度任意调节15-45(度)
Groove Angle to arbitrarily regulate 15-45 (c)
6.可加工材料广范碳钢,合金钢,不锈钢等.
Can be processed materials widely van carbon steel, alloy steel, stainless steel, etc
技术参数
Technical parameters
1.电压:220-240V
Voltage: 220-240 v
2.功率: 2450瓦
Power: 2450 watts
3.转速: 7500转/分钟(可调速)
Speed: 7500 revolution of/minutes (adjustable speed)
4.坡口角度：15 - 45o
Groove Angle: 15-45 o
5.坡面宽：1-15mm
Slope face width: 1-15 mm.
。
6.安全：软启动，热保护，过载保护
Safety: soft start, thermal protection, overload protection
7.尺寸：长x宽x高 560x150x360mm
Size: long x width x high 560 x150x360mm
8.重量: 8.5 Kg
Weight: 8.5 Kg
DK-10A曲线坡口机
DK-10A倒角机多功能管板坡口机是一款手动操作的电动工具,该机适用于加工焊接前的坡口(可加工成K,V,X,Y型坡口),不仅能对管子内孔进行坡口加工,也可以对板材进行坡口加工及金属材料的去毛边等.它的多功能性与灵活性,能够大量的提高工作效率而使之成为具有吸引力的设备,该机器结构非常紧凑,能够在环境复杂且难于加工的地方操作.
DK - 10 a multi-function tube plate groove machine is one hand operated electric tools, this machine is suitable for processing before welding groove (can be processed into K, V, X, Y type groove), can not only to pipe inner hole for groove processing, can also be on board for groove processing and metal materials deflashing, etc. Its versatility and flexibility, can a lot of improve work efficiency and make it become attractive equipment, this machine structure is very compact, can in the environmental complex and difficult to processing place operation.
技术特点：Technical features:
紧凑和轻便的设计──操作轻松自如,Compact and lightweight design ─ ─ operation easy
1850W强劲电机──大大提高加工效率 ,1850 w ─ ─ strong motor greatly improve processing efficiency
小巧的切削头──操作灵活,能达到不易加工的地方,Small cutting head ─ ─ flexible operation, can achieve not easy processing place
加工范围广──对直径50mm以上的管子做内外坡口均能达到要求Processing range ─ ─ to a diameter of 50 mm above the pipe to do inside and outside groove all can meet the requirements
坡口角度任意调节──15-45(度),Groove Angle to arbitrarily regulate ─ ─ 15-45 (c)
可加工材料广范──碳钢,合金钢,不锈钢等.Can be processed materials widely fan ─ ─ carbon steel, alloy steel, stainless steel, etc.
技术参数
电压：220-240V ，Voltage: 220-240 v
功率：1850瓦 ，Power: 1850 watts
转速：7500转/分钟(可调速) ，Speed: 7500 revolution of/minutes (adjustable speed)
坡口角度：15 - 45o ，Groove Angle: 15-45 o
坡面宽：1-10mm。Slope face width: 1-10 mm
安全：软启动，热保护，过载保护 ，Safety: soft start, thermal protection, overload protection
尺寸：长x宽x高 500x150x360mm ，Size: long x width x high 500 x150x360mm
重量：6.0Kg，Weight: 6.0 Kg
